The temperate of the room is set from the radiator control panel.

Each radiator has already been programmed and set to “Automatic” mode. If you find the temperate is too hot or cold the radiator can be changed to “Manual” mode and the temperate can be changed using the control panel.

• Firstly check the radiator is on by pressing the on/off [shown in red circle] button. The display should show the current temperature.

• Press the MAN/AUT button [shown in green circle] until the display shows “M” (Manual).

• Press the + and – buttons [shown in blue circles] until the desired temperate is shown on the screen.
   
• The heater will now maintain the temperate selected until the heater is either switched off, or changed back to “A” Automatic mode.

If you have changed any heater settings, please change all heaters back to “A” Automatic when you check out.